Rolpon PPD 40 is a viscous Solution of Alkyl Methacrylate Polymer in Neutral Oils recommended for use as a Pour Point Depressant for Lubricating Base Oils. In finished Lubricants they are compatible with other commonly used additive. Rolpon PPD 40 is used for Pour depressing Industrial and gear lubricants, Mono grade and Multi-grade crankcase oils.
| No | PARAMETERS | SPECIFICATIONS |
|---|---|---|
| 1. | APPEARANCE | Clear Viscous Liquid |
| 2. | COLOUR | Colorless to Amber |
| 3. | VISCOSITY@100 C (ASTM D445) | 100-400 CST |
| 4. | DENSITY@25C (ASTM D4052) | 0.89 Typical |
| 5. | FLASH POINT (COC) C (ASTM D92) | 150 min |
Recommended Dosage 0.1-0.5% for Group I and Group II oils.
Maximum Blending temp is about 90 C.
The product should be stored under the shed.
Max outside temp about 40 C.
Product will be stable for atleast 2 yrs if stored and handled properly.
ROLPON PPD 50 is an alkyl methacrylate type polymer in a biodegradable oil carrier and synthetic esters, specially designed for uses as pour point depressant, flow improver, Viscosity Index Improver, in formulation of environmental friendly lubricants based on vegetable oils and synthetic esters.
| No. | PARAMETERS | SPECIFICATIONS |
|---|---|---|
| 1 | APPEARANCE | Clear Viscous Liquid |
| 2 | COLOUR | Pale Yellow to Amber |
| 3 | VISCOSITY@100 C (ASTM D445) | 1000-1700 CST |
| 4 | DENSITY@25C (ASTM D4052) | 0.90 Typ (0.88-0.93 range) |
| 5 | FLASH POINT (COC) C (ASTM D92) | 150 min |
Recommended dosage is 0.5-10 wt% in formulation.
Maximum Blending temp is about 90
The product should be stored under the shed.
Max outside temp about 40 C.
Product will be stable for atleast 1yr if stored and handled properly.
ROLPON PPD 65 is a viscous Solution of Alkyl Methacrylate Polymer in Neutral Oils
recommended for use as a Pour Point Depressant for Lubricating Base Oils.
In finished Lubricants they are compatible with other commonly used additive.
ROLPON PPD 65 is used for Pour depressing Industrial and gear lubricants, Mono grade
and Multi-grade crankcase oils.
In addition to reducing the Pour Point, ROLPON PPD 65 is particularly effective in controlling low temperature viscosity under shear conditions.
| No | PARAMETERS | SPECIFICATIONS |
|---|---|---|
| 1. | APPEARANCE | Clear Viscous Liquid |
| 2. | COLOUR | Colorless to Amber |
| 3. | VISCOSITY@100 C (ASTM D445) | 300-800 CST |
| 4. | DENSITY@25C (ASTM D4052) | 0.92 Typ. (0.87-0.92 range) |
| 5. | FLASH POINT (COC) C (ASTM D92) | 150 min |
Recommended Dosage 0.1-0.5% for Group I, II and III oils.
Maximum Blending temp is about 90 C.
The product should be stored under the shed.
Max outside temp about 40 C.
Product will be stable for atleast 2 yrs if stored and handled properly.
