ROLPON 1349 is a phosphate ester partially neutralized. The product is stable in acidic and alkaline environments and with other additives. It gives good corrosion protection and antiwear properties. It also boost FZG performance.
| SR. NO. | PARAMETER | SPECIFICATIONS |
|---|---|---|
| 1 | APPEARANCE@30C | Clear Viscous Liquid |
| 2 | COLOUR (ASTM D1500) | 3.5 Max |
| 3 | DENSITY @ 30C | 0.98 Typical |
| 4 | COPPER CORROSION (0.5% in N150 -24 hrs @ 100C). | 1a-1b |
| 5 | Viscocity @40c | 291 |
| Viscocity @100c | 28 | |
| 6 | Density @30c | 0.97 |
| 7 | TBN | 65 |
| 8 | N2 | 1.63 |
| 9 | Acid Value | 160 |
| 10 | Cu Corrosion (0.5% in N150- 24 hrs @100C) | 1a |
| 11 | Demulsibility in N150 Grp2 0.20% | 15.5 |
| 0.40% | 13.5 | |
| 12 | Wear Scar (0.5% in N150) | 0.39 |
| (1.0% in N150) | 0.49 | |
| 13 | Steel Corrosion ASTM D665A - 0.2% and 0.4% in | 0 |
| 14 | N150 | 0 |
The product should be stored in cool shed away from heat source.
The product will be stable for 1 yr.
ROLNOX ZDDP is a zinc dialkyl dithiophosphate.
It is a chemical additive added to motor oils, gear oils, and greases.
It acts as an anti-wear agent and an antioxidant. for engine oil, greases and hydraulic oils.
It is used to impart oxidation stability as well as antiwear properties.
| No. | PARAMETERS | SPECIFICATIONS |
|---|---|---|
| 1 | APPEARANCE | Clear to Slight Hazy Liquid |
| 2 | COLOUR | Pale Yellow to Amber |
| 3 | FLASH POINT (COC) C | 150 min |
| 4 | % Zinc | 8-10% Typical |
| 5 | % Phosphate | 7-9% Typical |
| 6 | % Sulfur | 14-17% |
Recommended dosage is 0.1-2 wt% in formulation depending on base oil, other additives and properties desired.
Maximum Blending temp is about 90 C.
The product should be stored under the shed.
Max outside temp about 40 C.
Product will be stable for atleast 1 yrs if stored and handled properly.
ROLPON CI 374 is an ashless corrosion inhibitor for industrial and automotive lubricants.
It is an alkylated organic ester.
It gives good rust performance with demulsification properties.
It is recommended for hydraulics, compressor, steam turbines, greases and other automotive lubricants.
It gives good thermal and hydrolytic stability.
| NO | PARAMETERS | SPECIFICATIONS |
|---|---|---|
| 1 | APPEARANCE@ 30C | Clear Viscosus Liquid |
| 2 | COLOR | Yellow to Amber |
| 3 | VISCOSITY @ 40C (ASTM D44 | 700 CST Max |
| 4 | ACID VALUE | 150 min |
| 5 | FLASH POINT (ASTM D92) | 150 min |
Recommended dosage in finished lubricant is 0.05 to 5%.
The product should be stored in cool shed away from heat source.
The product will be stable for 2 yr.
Max blending temp suggested is about 85 C.
ROLPON SCO 9-320 Synthetic high-performance gear and high-temperature oil.
It is a synthetic high-performance gear and high-temperature oil based on polyglycol satisfying the
growing requirements and increasing power density of modern gears.
It is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
| ROLPON SCO 9-320 | SPECS | RESULTS |
|---|---|---|
| APPEARANCE | Clear Liquid | Clear Liquid |
| COLOUR | 4.0 Max | 2.5 |
| VISCOSITY@40 C (ASTM D445) | 290 to 350 | 320 |
| VISCOSITY@10 C (ASTM D445) | 50 to 60 CST | 55 |
| VISCOSITY Index (ASTM D2270) | >230 | 242 |
| Acid Value | 3.0 Max | 1.8 |
| Density @25C (ASTM D4052 | 1.03 to 1.06 | 1.0498 |
| Pour Point (ASTM D97) | -33 | -33 |
| Flash Point (ASTM D92) | >220 | 230 |
| Steel Corrosion | ||
| D665A | 0 | 0 |
| Copper Corrosion (D130) | ||
| 3 HRS@ 100 C | 1a-1b | 1a |
| 24 HRS@ 100 C | 1a-1b | 1b |
| Weld Load - Pass Load ( kgs) (ASTM D2596) | 200 | |
| Weld Load - Welded ( kgs) | 250 | |
| 4-ball Wear Test ( ASTM D2266) | 0.45 MM | |
| Foam Test (D892) | ||
| Sequence I/II/III After 10 Min Setting Period | 0/0/0 | |
| FZG Scuffing Test A/8.3/90 (ISO14635-1:2000) | >12 | |
| FAG FE 8 Bearing Wear Test (Din 51819-3) | ||
| Bearing / Rollers 20.5 | 20.5 | |
| FZG Scuffing Test A/16.6/90 |
